Overview: This article will discuss the normal light indicators when a Foscam camera is plugged into a network and operating normally.

1.    Indoor Pan and Tilt cameras:
•    During initial power-up the camera will pan and tilt automatically if configured to do so via the camera settings.
•    The red power indicator will be turned on.
•    The green network indicator will blink.
•    The small green RJ-45 LED will turn on and the orange LED will blink after network initialization.

2.    Indoor Fixed cameras:
•    The red power indicator will be turned on.
•    The green network LED will blink.
•    The small green RJ-45 LED with turn on and the orange LED will blink after network initialization.

3.    Outdoor Weather Resistant cameras:
•    The small green RJ-45 LED will turn on and the orange LED blink after network initialization.

4.    Outdoor Pan and Tilt cameras:
•    During initial power-up the lens inside of the dome will pan and tilt automatically if programmed to do so via the camera settings.
•    The small green RJ-45 LED will turn on and the orange LED will blink after network initialization.